How to Use Your Digital Display Telephone
Below are instructions on how to use the features of your display phone.
AUTHORIZATION CODELift handset or press directory key...(hear dial tone)...dial Authorization Code...(hear dial tone...dial call.) (During active call) Press TRANSFER or CONFERENCE key...(hear dial tone)...dial Authorization Code...(hear dial tone)...dial call...use TRANSFER or CONFERENCE key as needed. AUTOMATIC DIALWithout lifting the handset...press AUTO DIAL key (lamp flashes)...dial number to be programmed...press AUTO DIAL key again (lamp goes dark). (To Use) Lift handset or press directory number key... (hear dial tone)...press AUTO DIAL key... (Number is automatically dialed) CALL FORWARDWithout lifting handset, press CALL FORWARD key (lamp flashes... dial four-digit number where calls are to be forwarded...press CALL FORWARD key again (lamp flashes steadily) (To cancel) Press CALL FORWARD key (lamp goes dark) CALL PICKUPLift handset...(hear dial tone)...press CAll PICKUP key... answer call. CALL TRANSFERPress TRANSFER key (first call is placed on automatic hold)...dial number...press TRANSFER key again... hang up. (To activate using Conference Key) Press CONFERENCE key (first call is placed on automatic hold)... dial number...announce caller in privacy...press CONFERENCE key again...press release key...hang up. CALL WAITINGPress HOLD key (to put first call on hold)...press CALL WAITING key to answer call...(to reconnect with the first call, press directory number where call is being held). NOTE: Only works for direct in dial calls. CONFERENCEhold)...dial number...announce conference...press CONFERENCE key again...repeat procedure for additional conferees (up to six parties, including yourself). DIAL INTERCOMintercom number. LAST NUMBER REDIALnumber key during dial tone...(last number is automatically redialed.) RING AGAINHear busy signal...press RING AGAIN (lamp lights steadily)... hang up. NOTE: Only works for internal calls. (To respond) Set will buzz (RING AGAIN lamp flashes)...lift handset... (hear dial tone)...press RING AGAIN key. (To cancel) Without lifting hanset...press RING AGAIN key. SPEED CALLWithout lifting handset, press SPEED CALL key (lamp flashes) ...dial one or two-digit Speed call access code (0-9 or 00-24 or 00-49)...dial number to be stored...press SPEED CALL key again (lamp goes dark). NOTE: Call must be programmed as actually dialed, i.e., 9 1 202 844 1212. (To Erase-Controller only) Press SPEED CALL key...dial one or two-digit Speed call access code (0-9 or 00-24 or 00-49)...press* (number is auto- matically erased)...press SPEED CALL key. (To use) Lift handset or press directory number key...(hear dial tone)...press SPEED CALL key...dial one or two-digit Speed call access code (0-9 or 00-24 or 00-49)...(number is automatically erased). |
