Information Services

Information Services

Virtual Private Network

Home / Technology Resources / Virtual Private Network
A Virtual Private Network (VPN) connects your device to the UMKC network and allows your device to access UMKC network resources from off-campus. This means it is visible as part of the UMKC network which exposes it to the same threats as any device physically located on the campus. These may include attempts to gain unauthorized access to your machine. Your device's vulnerability is determined by the security settings, policies, and behaviors you employ in the use and management of the device. It is your responsibility to protect your device from unauthorized access. It is recommended you always ensure your operating system, anti-virus, and other security software is fully up to date.

Installation & Connection Instructions

Installing the VPN client
  1. Sign in to https://weblogon.umkc.edu/global-protect/login.esp with your username@umsystem.edu to download the VPN client.
  2. Double click the downloaded installation file for Palo Alto Global Protect VPN.
  3. If you receive a security prompt, click Run.
  4. You will be asked if you want to install the VPN Client. Click "Next" to continue.
  5. Confirm the installation of the GlobalProtect VPN Client. Click "Next" to continue.
  6. Once the client installation has finished, click "Close".

Using the VPN client

  1. You must have an internet connection before using the VPN client.
  2. Launch Global Protect from the Windows Start Menu or click the globe icon in the taskbar. 
  3. When asked to enter "your portal address" type the following (without quotes) "weblogon.umkc.edu".
  4. Click Connect.
  5. Enter your username@umsystem.edu and password.
  6. Click Sign In.
  7. You will be redirected to a Microsoft sign-in page to complete multi-factor authentication.
  8. Check the globe icon in your system tray to confirm the VPN connection status. When connected, this icon will be blue.

Installing the VPN client

  1. Sign in to https://weblogon.umkc.edu/global-protect/login.esp with your username@umsystem.edu to download the VPN client.
  2. You will be asked if you want to install the VPN Client. Click Continue.
  3. Click Continue to install to the default destination.
  4. You will be prompted to customize the installation. Click Continue to accept the default configuration.
  5. Confirm the installation of the GlobalProtect VPN Client by clicking Install.
  6. You will be asked to enter a local administrator username and password. Click Install after entering these credentials.
  7. The application will be installed. Once the installation finishes, click Move to Trash to discard the installer.
  8. Click Allow on the Global Protect notification prompt.

Using the VPN client

  1. You must have an internet connection before using the VPN client.
  2. Click the globe icon in your Finder bar. 
  3. When asked to enter "your portal address" type the following (without quotes) "weblogon.umkc.edu".
  4. Click Connect.
  5. Enter your username@umsystem.edu and password.
  6. Click Sign In.
  7. You will be redirected to a Microsoft sign-in page to complete multi-factor authentication.
  8. Check the globe icon in your Finder bar to confirm the VPN connection status. When connected, this icon will be blue.

  1. Open the Apple App Store.
  2. Search for GlobalProtect.
  3. Install GlobalProtect Secure Network Connection from the developer Palo Alto Networks.  
  4. Open GlobalProtect.
  5. If asked '"GlobalProtect" Would You Like to Send You Notifications' please click "allow". 
  6. Tap the white round button with a shield in the center to connect. 
  7. If asked for a "Portal Address" please type the following (without quotes) "weblogon.umkc.edu".
  8. For Account, enter your username@umsystem.edu.
  9. For Password, enter your password. Note: you will need to manually update your VPN settings every time you change your UMKC Username password.
  10. Tap "Connect".
  11. You will be redirected to a Microsoft sign-in page to complete multi-factor authentication.
  12. When you no longer need the VPN connection, open the GlobalProtect app and tap the white round button with a shield in the center.
  13. From this point forward, when you need VPN on this device, open the GlobalProtect app and tap the white round button with a shield in the center to connect.   

  1. Open the Google Play Store.
  2. Search for GlobalProtect.
  3. Install GlobalProtect from developer Palo Alto Networks.  
  4. Open GlobalProtect.
  5. When prompted for a Portal Address, type the following (without quotes) "weblogon.umkc.edu".
  6. Tap Connect.
  7. For Account, enter your username@umsystem.edu.
  8. Enter your password. Note: you will need to manually update your VPN settings every time you change your UMKC password.
  9. Tap Sign In.
  10. You will be redirected to a Microsoft sign-in page to complete multi-factor authentication.
  11. When you no longer need the VPN connection, open the GlobalProtect app and tap the white round button with a shield in the center.
  12. From this point forward, when you need VPN on this device, open the GlobalProtect app and tap the white round button with a shield in the center to reconnect.   

Installing the VPN client

Please note: These are the basic settings required for any version of Linux. If you are using a different distribution of Linux the dialog boxes will vary, but the procedure will be similar. Step-by-step instructions for specific builds are not provided by UMKC.

  1. Download the Global Protect Client.
  2. Open a shell window, go to the folder you saved the file, and Execute: tar -xvf ~/pkgs/PanGPLinux-6.0.0.tgz
  3. For Debian and Ubuntu Execute: sudo apt-get install GlobalProtect_UI_deb-6.0.1.1-6.deb
  4. For CentOS and RedHat Execute: sudo yum install -y GlobalProtect_UI_rpm-6.0.1.1-6.rpm
  5. The app should then launch. When prompted use the below settings.

Using the VPN client

  1. You must have an internet connection before using the VPN client.
  2. Launch Global Protect
  3. When asked to enter "your portal address" type the following (without quotes) "weblogon.umkc.edu".
  4. Click Connect.
  5. Enter your username@umsystem.edu and password.
  6. Click Sign In.
  7. You will be redirected to a Microsoft sign-in page to complete multi-factor authentication.